TAB42AMPSMCArkon Locking Tablet Mount with Hardwire Kit and USB Cable

Put together for commercial and enterprise fit-outs, this locking tablet mount bundle supplies everything required to install a tablet in a fleet vehicle or at a point-of-sale station: an adjustable locking tablet drill base mount with security hardware, a 6-foot fixed install USB vehicle power adapter for hardwiring into a vehicle, and a removable 3-foot magnetic USB to USB Type-C cable. The 4-Hole AMPS base bolts or drills onto any flat surface (screws are not supplied).The adjustable holder is built from aluminium and uses a key lock, with keys included, to hold tablets measuring up to 10 1/4" x 8 5/8" x 7/8" firmly in position. Both sides of the holder offer a series of horizontal and vertical adjustment points, so it suits tablets as compact as the G Pad 7.0 right through to one as large as the Nexus 10. A 7mm and a 10mm socket wrench are used to set the holder to your tablet's dimensions. The holder accommodates tablets with a 7"-10" screen size, such as the Galaxy Note 10.1, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Microsoft Surface Go, Nexus 9 and LG G Pad 10.1. The fixed install vehicle power adapter has a female USB connector, takes 12-24 input voltage and delivers up to 2.4 Amp output, so the tablet stays charged while it remains mounted. It plugs into the magnetic USB to USB Type-C charge cable, letting you leave the connector sitting in your tablet's port. Charging is as easy as bringing the magnetised cable up to the connector, with no repeated plugging and unplugging. Leaving the connector in place helps extend the life of the charge port and shields it from dust, dirt and other grime. The cable is rated at 5 Volts and 2 Amps and runs 3 feet (1 metre) in length. If your tablet wears a case, the case needs at least 10mm x 10mm of clearance at the charge port opening for the round connector to seat.