
Arkon RoadVise Series - Sticky Suction Universal Smartphone Mount for Dash / Windshield (RV001WR + GN079)
The RV179 RoadVise pairs a spring-loaded phone cradle with a sticky suction pedestal, so it works just as happily on a windscreen as it does on a dash or other flat to lightly textured surface. It carries phones (cases included) up to 2 pounds in weight and 4" across.
Distributor
1988
Pricing Available
Support
- Robust smartphone cradle handles devices up to 4 inches wide and 2 pounds, iPhone 8 included
- Gel-backed suction base grips smooth surfaces as well as lightly textured ones
- Slim cradle profile leaves rear cameras clear
- Backed by a 2 year limited warranty
The RV179 RoadVise from Arkon is a premium car cradle built for dashboards, windscreens and other flat or mildly textured panels. With a case fitted, it accommodates phones weighing up to 2 pounds and measuring up to 4” in width — that covers the Apple iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, iPhone 6S and 6S Plus and iPhone 6 and 6 Plus, Samsung Galaxy Note 8, Note 5 and Note 4, Galaxy S8, S7 and S6, Google Nexus 6 and Nexus 5, LG G6, G5 and G4, HTC One M9, One M8 and One Max, Nokia Lumia 1020 and 1520, plus the Motorola Moto G and Moto X. A spring-loaded action opens the arms and clamps firmly onto handsets up to 4” wide, and Arkon suggests running the RoadVise Holder with phones wearing skins or rugged cases. Two hands are needed to load and unload your device by design, so nothing pops loose while you tilt the screen to a better angle. Because the cradle sits low, the rear camera stays exposed for quick photos or video. Setting it up takes seconds: press the cradle onto the pedestal's 17mm ball and lock it down with the supplied tightening ring. The base combines polyurethane gel with suction for an exceptionally strong bond across the whole contact area. On soft vinyl, leather or similar dash materials, Arkon recommends fitting the included 3M adhesive mounting disk to avoid leaving permanent indentations. Despite that grip, the sticky suction mount lifts off cleanly and can be reused. The arm swings vertically and rotates a full 360°, so you can line the screen up however suits the driver. Prefer a Garmin GPS? Take the cradle off and the 17mm ball mount base underneath is ready to go. The RV179 is a dependable in-car mounting answer for everyday driving and longer road trips alike.
Related Products

MG002WR
Arkon Mobile Grip 2 Holder with Swivel Tightening Ring
A spring-loaded cradle that stretches to grip any smartphone up to 3.6" wide, including handsets wearing skins or tou...

GN034
Arkon Pedestal Bicycle / Motorcycle Handlebar Mount with Zip Tie Style Strap for Garmin Nuvi
Suits Garmin nuvi GPS units, or Garmin car mounting bracket holders, that use the 17mm swivel ball mounting pattern.

MGSTRIXL
Magnetic Phone Holder with 11" Flexible Tripod - MagSafe Compatible
A metal magnetic phone holder with twenty N52-grade Neodymium magnets keeps your handset locked in place, making it a...

XL088-G17
Arkon RoadVise XL Car Seat Rail or Floor Mount for Phone and Midsize Tablets
The XL088-G17 pairs Arkon's RoadVise XL holder with a heavy-duty seat rail or floor base, gripping large phones and m...

SR114
Arkon Sat Radio Mount - Deluxe Windshield & Dashboard
A suction mount built for Sirius and XM satellite radios, plus any gear using a Single T-Tab or 4-Hole AMPS pattern.

MC2B
Arkon Motorcycle Handlebar Mounting Pedestal Black
A tough aluminium pedestal that clamps to handlebars up to 31.75mm (1.25 inches) across and installs in minutes.

GN079WD
Arkon Garmin Nuvi Mount Flat Surface Sticky Suction Mount Bundle
This GN079WD sticky suction mount attaches to your windscreen or dash and suits Garmin nuvi 40, 50, 200, 2013, 24x5 a...

RMCPM2517
Arkon Robust Clamp Mount with Security Knob - 17mm Compatible
Fitting takes nothing more than a twist of the clamp knob, and the padded jaws grip firmly while protecting the surfa...
