Arkon Heavy-Duty Multi-Angle Drill-Base Mounting Pedestal for VESA 75/VESA 100 Compatible Devices

Fit the HD6VESA20 pedestal as a straight replacement, an upgrade, or an extra mounting position alongside an existing pedestal that uses the 4-Hole AMPS pattern. It works with any device carrying a VESA 75 or VESA 100 mounting pattern. Supplied in the box is Arkon's 9" Heavy-Duty Aluminium 4-Hole Drill Base Mounting Pedestal with Multi-Angle Arm and VESA 75/VESA 100 Head, while devices and holders are purchased separately. Along the arm of this solid 9" mount you'll find three adjustment knobs set at 2.5" intervals, making it simple to dial in the height and reach you need. A further two 180° adjustment points, one at the top and one at the bottom of the mount, widen your positioning options even more. Once an industry standard, the 4-Hole AMPS pattern is made up of four holes arranged in a rectangle spaced 30.17mm by 38.05mm apart, measured centre to centre between the holes. Built from strong aluminium, the four-hole drill base is the right choice wherever a long-term, fixed installation makes sense, such as a workshop bench or a retail counter. Screws are included. You can also fasten the base straight into the floor or console of a car, ute or truck. (Warning: Drilling into the vehicle's floor may damage the vehicle. Take care and speak with a mobile install professional so you don't drill into any sensitive vehicle components.) Set the multi-angle arm where you want it, then turn the swivel ball adapter head through a full 360° to bring the device to the exact viewing angle you're after.