XMS™ Series
The XMS series offers a modular, expandable mounting system with interchangeable components. Build your ideal setup by mixing and matching bases, arms, and holders.
Showing 42 of 42 products
AP20MMAL
The AP20MMAL is a handy adapter that turns a 20mm ball pedestal into a 4-Hole AMPS mounting point.
APXMS57AMPS
This XMS adapter pairs an oversized 2.25” / 57mm metal ball with a four-hole AMPS plate, ready for devices over 10 lb...
APXMS57VESA
This VESA plate pairs a 2.25" / 57mm XMS metal ball with a 75x75mm and 100x100mm VESA pattern, machined from aluminiu...
SPRMET02
A 3.75 inch solid metal shaft arm with 25mm (1") ball ends at both sides, letting you build a mount to suit the job.
SPUBOLTMT15
A pedestal-style U-bolt clamp topped with a 38mm metal ball, built to grip round bars, rails and tubing.
SPUBOLTMT2
A pedestal-style U-bolt clamp fitted with a 38mm metal ball, sized for 1.75" - 2" diameter bars, rails and tubing.
UB138MM5RBAMPS
This XMS™ U-bolt mount clamps onto rails, bars and poles from 1" to 1.25" in diameter and carries a 4-hole AMPS plate...
UB138MM5RBCAM
A heavy-duty U-bolt mount that clamps an action camera to rails, bars and tubing from 1" to 1.25" in diameter, with n...
UB138MM5RBHLSXL
A heavy-duty U-bolt holster mount that clamps to rails, poles and bars from 1" to 1.25" in diameter and keeps your ba...
UB138MM5RBRVKN
A heavy-duty U-bolt mount that clamps onto rails, bars and poles from 1" to 1.25" in diameter, teamed with the RoadVi...
UB138MM5RBRVPT
A heavy-duty U-bolt mount that clamps onto 1" - 1.25" diameter rails, bars and poles, paired with the RoadVise® Ultra...
UB138MM5RBSM090
A heavy-duty U-bolt mount paired with the LockVise™ locking phone holder, sized for rails, poles and bars from 1" to ...
UB138MM5RBT004
A heavy-duty tablet mount pairing a locking aluminium holder with the XMS™ 38mm ball system for solid, low-movement p...
UB138MM5RBT006
A u-bolt mount that clamps to 1" to 1.25" diameter poles and holds tablets from 6.37" to 11.12" tall in the spring-lo...
UB138MM5RBVESA
A heavy-duty VESA u-bolt mount that clamps onto 1" - 1.25" diameter bars, rails and tubes without drilling.
UB1538MM5RBAMPS
A no-drill U-bolt mount fitted with a 4-hole AMPS plate, ready to carry AMPS-compatible holders and gear on rails, ba...
UB1538MM5RBCAM
A heavy-duty U-bolt camera pedestal built on the XMS™ 1.5" / 38mm ball system, clamping straight onto rails, bars and...
UB1538MM5RBHLSXL
A U-bolt holster mount that clamps to rails, poles and bars so your barcode scanner stays parked within arm's reach.
UB1538MM5RBRVKN
A heavy-duty U-bolt phone mount that clamps onto rails, bars and poles without drilling, teamed with the RoadVise® Ul...
UB1538MM5RBRVPT
A heavy-duty U-bolt phone mount that clamps to rails, bars and poles without drilling, paired with the RoadVise® Ultr...
UB1538MM5RBSM090
A heavy-duty locking U-bolt mount that clamps onto rails, poles and bars up to 1.5" in diameter with no drilling requ...
UB1538MM5RBT004
A heavy-duty tablet mounting solution that pairs a lockable aluminium holder with the XMS™ 38mm ball system for stead...
UB1538MM5RBT006
A U-bolt tablet mount that clamps onto poles and bars without permanent installation, holding your tablet steady and ...
UB1538MM5RBVESA
A heavy-duty VESA u-bolt mount that clamps onto rails, bars and tubes without drilling, with an aluminium plate suiti...
UB238MM5RBAMPS
This XMS™ U-bolt mount pairs a reinforced metal U-bolt base with a 4-hole AMPS plate, clamping onto rails, bars and p...
UB238MM5RBCAM
A heavy-duty U-bolt mount with a ¼"-20 camera pedestal, built to hold an action camera steady on rails, bars and tubi...
UB238MM5RBHLSXL
A no-drill U-bolt mount that clamps to rails, poles and bars between 1.75" and 2" in diameter and holds a large barco...
UB238MM5RBRVKN
A heavy-duty U-bolt phone mount that clamps onto rails, bars and poles between 1.75" and 2" in diameter, paired with ...
UB238MM5RBRVPT
A heavy-duty U-bolt mount that clamps onto rails, bars and poles from 1.75" to 2" in diameter, paired with the RoadVi...
UB238MM5RBSM090
A no-drill U-bolt mount that clamps to rails, poles and bars, paired with the LockVise key-locking holder for phones ...
UB238MM5RBT004
This heavy-duty mount pairs a U-bolt base for 1.75" to 2" diameter tubing with a lockable aluminium tablet holder and...
UB238MM5RBT006
This u-bolt mount clamps onto 1.75" to 2" diameter poles and holds tablets from 6.37" to 11.12" tall in the spring-lo...
UB238MM5RBVESA
A heavy-duty VESA u-bolt mount that clamps onto rails, bars and tubes from 1.75" to 2" in diameter without drilling.
XMSFL38RM5AMPS
A rigid, all-metal mounting system made for forklifts, bolting to front guard structures or overhead guard rails.
XMSFL38RM5TAB4
A fully metal forklift mounting system that bolts to front guard or overhead guard rails and holds a tablet where the...
XMSFL38RM5TAB4XL
An all-metal XMS™ mounting solution that fits larger tablets to a forklift's front guard or overhead guard rails.
XMSFL38RM5TAB5
An XMS™ mounting system for material handling, designed to fit tablets to forklift front guard or overhead guard rails.
XMSFL38RM5UBT
An all-metal XMS™ mount that fixes to a forklift's front guard or overhead guard rails and carries compatible devices...
XMSFL38RM5VESA
An all-metal XMS mounting system that fixes a VESA-compatible display to a forklift's front guard or overhead guard r...
XMSFL38RM8AMPS
A rigid, all-metal mounting solution built for forklifts, attaching to front guard structures or overhead guard rails.
XMSFL38RM8VESA
An all-metal XMS™ mounting system that fixes VESA-compatible displays to a forklift's front guard or overhead guard r...
XMSFLIFT38HDMMAL
A heavy-duty XMS™ base that clamps to forklift front guard rails or overhead guard structures using a dual-plate design.