AP036-BArkon Bulk Version of AP036 - 70mm Adhesive Dash Disk for 60mm Suction Mounts

The AP036 is a 70mm adhesive dash disk that creates a flat, grippy surface for an Arkon or third-party 60mm windscreen suction pedestal on your dashboard, including the pedestals that come with Garmin and TomTom GPS units. (The disk is deliberately a little wider than the suction cup so the seal has plenty of surface to grab.) Only the adhesive disk is supplied here — mounting pedestals are sold separately. Fitting is straightforward: peel the paper backing away from the rear of the 3M-backed plastic disk, then position it and press firmly onto a surface you've already cleaned. (Wipe the spot with the included alcohol pad first so no dashboard conditioner or other treatment is left behind. Ideally, give the adhesive a full 24 hours to cure before locking the base of the suction pedestal onto the centre of the disk.) Although it's designed as a semi-permanent fitting, the disk can be lifted later — soak the edges with a good amount of rubbing alcohol or a similar adhesive remover using a cotton swab, let it work into the bond, then slide a long length of dental floss underneath and saw through the adhesive until the disk lets go. Need a larger size? Arkon Model AP013 is an 80mm disk suited to 70mm suction mounts, while Model AP020 is a 90mm disk for 80mm suction mounts.