GPS
Dedicated GPS mounts for Garmin, TomTom, and other navigation devices. Windshield, dashboard, and vent-mount options for cars, trucks, and fleet vehicles. Keep your GPS unit visible and secure.
Showing 48 of 53 products
APAMPS17MM
The APAMPS17MM adapter turns any 17mm ball mount into a 4-Hole AMPS drill-base fitting.
APVHB20
Backed by heavy-duty 3M VHB adhesive, the APVHB20 is a 90mm disk that gives any 80mm windscreen suction pedestal — Ar...
GN079WD
This GN079WD sticky suction mount attaches to your windscreen or dash and suits Garmin nuvi 40, 50, 200, 2013, 24x5 a...
APVHB13
The APVHB13 is an 80mm dash disk backed with extra-strength 3M VHB adhesive, giving any Arkon or third-party 70mm win...
AP2T17MM
The AP2T17MM is a handy conversion piece that turns any Dual-T pattern pedestal into a 17mm ball fitting for Garmin G...
CM088-G17
Designed for Garmin nuvi units that use the 17mm swivel ball mounting pattern, the CM088-G17 mounts to your vehicle's...
GN014
The GN014 is a windscreen-mounted pedestal built for Garmin nuvi units that use the 17mm swivel ball mounting pattern.
GN034
Suits Garmin nuvi GPS units, or Garmin car mounting bracket holders, that use the 17mm swivel ball mounting pattern.
RVAMPS
The RoadVise RVAMPS pairs a spring-loaded universal phone holder with a four-hole AMPS pedestal for car or wall use.
GN032
Suits Garmin nuvi GPS units — or Garmin car bracket holders — that use the 17mm swivel ball pattern.
AP013
This 80mm AP013 disc gives you a solid adhesive base on your dashboard for any Arkon or third-party 70mm windscreen s...
AP020
This 90mm adhesive disc gives any 80mm windscreen suction pedestal a solid home on your dashboard, including Garmin a...
AP036
The Arkon AP036 is a 70mm adhesive disc that gives your dashboard a solid mounting surface for any Arkon or third-par...
AP142022MM
Designed to suit any tripod, monopod or accessory fitted with a 1/4"-20 mounting bolt.
APAMPSVHBWS
The APAMPSVHBWS adapter bundle from Arkon pairs with Arkon's Dual-T pattern universal phone and tablet holders, which...
APSRVHBKIT
The APSRVHBKIT from Arkon suits any satellite radio using a Single-T mounting pattern, covering XM Satellite Radios s...
BT010
The Arkon BT010 suction mount is built for gear that needs to sit high on the windscreen — Bluetooth GPS receivers, c...
CAMAG1C
The CAMAG1C from Arkon is a USB to USB-C charging lead with a detachable magnetic Type-C tip, making it a handy way t...
CAMAG1L
The CAMAG1L pairs a standard USB cable with a detachable magnetic Lightning tip, making charging Apple iPhone, iPad a...
CAMAG1M
This Arkon charging lead pairs a standard USB plug with a magnetic Micro USB connector that clicks on and off, so you...
GN01022VHB-B
Standing just 1.25" tall, this discreet base sticks firmly to virtually any flat surface — dashboards and centre cons...
GN010VHB
Built for Garmin nuvi units with the 17mm swivel ball fitting, this slim adhesive base sits neatly on any flat surfac...
GN015
Hold your Garmin nuvi GPS steady on the windscreen with this car and truck suction mount.
GN031-B
Built around a 17mm swivel ball, the GN031-B clamp post mount suits Garmin nuvi units using the 17mm ball mounting pa...
GN032-SBH
The GN032-SBH handlebar mount works as a straight replacement, an upgrade, or a second mounting point alongside your ...
GN042
The GN042 is a windscreen suction pedestal built for Garmin nuvi units that use the 17mm swivel ball mounting pattern.
GN057
Clips firmly onto horizontal or vertical air vent louvres, with a support leg underneath for extra steadiness and two...
GN077B
Built to pair with any of Arkon's 17mm device holders, this vent mount base gives you a solid, fuss-free mounting poi...
GN079WD-SBH
The GN079WD-SBH sticky suction pedestal is a straight swap or upgrade for an existing pedestal, and works with Arkon'...
GN092-L28-AMPS
Mounting straight to your seat rail, the Arkon GN092-L28-AMPS pedestal pairs a 28-inch bendable aluminium gooseneck w...
GN115
Suits Garmin nuvi GPS units that use the 17mm swivel ball mounting pattern.
GNCDSLOT
This CD slot holder puts your Garmin GPS at eye level without adding anything to your dash or windscreen.
GPSHDCS7
A padded, zip-close hard shell case sized to carry 5in, 6in and 7in GPS units, selected 7in tablets and other accesso...
HD010AMPS
Measuring 6 inches end to end, the HD010AMPS pedestal is a genuinely flexible mounting solution — fit it as a straigh...
HD6802017
A heavy-duty suction mount built for windscreens and dashboards, with a 20mm ball fitting and an included 20mm to 17m...
IBMAG129
A magnetic mount that holds your phone or device securely without any cradle or clamp — the magnetic head simply grip...
KNMC8BK
A handlebar clamp and RoadVise® Ultra Holder combination that keeps your phone or tablet in view on motorcycles, dirt...
MC25MM17
The MC25MM17 pairs a 17mm ball end with a short Robust mount shaft and a handlebar ring collar, so you can fit a wide...
MC2B
A tough aluminium pedestal that clamps to handlebars up to 31.75mm (1.25 inches) across and installs in minutes.
MC2C
This chrome aluminium pedestal clamps onto handlebars and poles between 21.68mm and 30mm in diameter, and carries Gar...
MC4B17MM
The Arkon MC4B17MM is a premium aluminium handlebar mount built for motorcycles and bikes, suiting Garmin nuvi 40, 50...
RM0232517
A tough cup holder pedestal that works with 17mm ball holders and adapters, plus select Garmin GPS units built around...
RM2X803250
Part of the Arkon Robust Mount Series, the RM2X803250 pairs two 80mm windscreen suction bases with three Robust shaft...
RM382XMAMPS
A 7 inch metal pedestal with a robust 38mm (1.5 inch) ball-compatible shaft arm, made to bolt onto solid flat surfaces.
RMAMPS2517
Part of Arkon's Robust Mount Series, the RMAMPS2517 pedestal is an easy upgrade or straight swap for an existing 17mm...
RMCPM2517
Fitting takes nothing more than a twist of the clamp knob, and the padded jaws grip firmly while protecting the surfa...
RMSMAMPS2517
The RMSMAMPS2517 from Arkon's Robust Mount Series pairs a drilled 4-hole AMPS base with a 17mm ball, ready to be fixe...
RV127
The RV127 RoadVise from Arkon is a handlebar mount built for phones measuring up to 4" wide, including the weight of ...